Columns
On square, rectangular and circular columns the section is locked in the formwork. Hire leads on low-repetition elements.
Shoring and Formwork Systems
Column and Wall Formwork
Load-bearing element formwork for columns and walls. The section is locked, the pour is taken, then moved to the next element. Hire, sale and erection.
Columns and wallsLoad-bearing elementm² hireHire and sale
Technical specifications
Column and wall formwork quantities depend on element face area. The framework below is for survey before quotation; the net section is locked on site.
| Item | Value |
|---|---|
| Use | Columns, walls and special vertical sections |
| Build-up | Element-specific formwork; walers and tie-rods |
| Hire unit | m² / month or project m² |
| Package | Formwork face + vertical support (prop / table) |
| Site rule | Section and striking sequence in the survey note |
| Stock | İzmir Torbalı, İstanbul Tuzla / Orhanlı, Kosova Ferizaj |
Where is it used?
Column-wall formwork is not a magic wand for every vertical element. It is the backbone on special sections and low-repetition members; on long repeating walls the system changes.
Short walls and starter-bar lines
This set is used on short walls, stair walls and starter-bar details where trio panels are not enough.
Lift cores and special sections
Tight cores, inclined walls and broken geometry want special formwork. Panels shrunk by guesswork leak.
Column-wall formwork or trio?
Selection is not the cheapest m². This set on columns and special sections; trio formwork on repeating walls; table form or telescopic props under the slab.
| Case | Right system |
|---|---|
| Columns and special sections | Column and wall formwork |
| Repeating wall / core | Trio formwork |
| Slab falsework | Table form |
| Changing levels, small spans | Telescopic prop |
Frequently asked questions
What column and wall formwork is, when it is chosen, how price is read — short answers.
What is column and wall formwork?
Column and wall formwork locks the section of a reinforced-concrete vertical member. It is used on columns, short walls and special geometry. On repeating long walls, trio formwork is faster; the support under the slab is not this formwork.
When is column-wall formwork used?
It is correct on single columns, low-repetition walls, lift cores and broken sections. On straight, repeating walls from basement to storey, trio formwork is chosen. Selection follows element geometry, not panel length.
Column-wall formwork or trio formwork?
Column-wall formwork on columns and special sections. Trio formwork on repeating straight walls and cores. Under the slab, table form or telescopic props. All three can stand on the same site; mixed sets are not erected by guesswork.
How is column and wall formwork priced?
Hire is usually m² / month; a project set is read in m². Element type, section and number of cycles shift the unit price. Reference ranges are on the price page; the firm figure comes after survey.
Hire or buy?
Hire leads on low-repetition column work. Contractors producing walls and columns continuously take core stock and hire the peak. Vertical support and the striking plan are discussed under the same roof.
Talk through your project with 3B İskele
Reach the 3B İskele team for survey, rental, sales and erection. Don’t close quantities by guesswork — we’ll pin down the right system together. Use 3biskele.com or WhatsApp for a quote.
Izmir Head Office · Torbalı / Izmir
Istanbul Factory & Warehouse · Tuzla / Orhanlı
Kosovo Warehouse · Ferizaj